Mitigating Self-Generated Communications Interference
Inadequate isolation between a transmitter and a receiver in a cosite environment results in the receiver’s diminished ability to process a weak desired signal- a condition termed “desensitization”.
|
Part Number: |
ICE3006-TR-225-400
|
|
Operation:
|
Transmit and receive filter/amplifier or bypass |
|
Frequency Coverage: |
30 - 174 MHz Bypass |
|
Receive Gain: |
7.0 to 11.0 |
|
Receive Noise Figure: |
9.5 dB max @ 225 - 395 MHz |
|
Receive Input IP3: |
60dBm @ 5 & 10% offset |
|
Transmit RF Output Power (nominal): |
30W (AM) |
|
Selectivity:
|
UHF Transmit: UHF Receive: |
|
Broadband Noise: |
-142 dBm/Hz @ ± 10 MHz |
|
Harmonics:
|
<-90 dBc (typical) |
|
Spurious:
|
-150 dBc @ 4% |
|
Tuning Speed: |
200μS
|
|
Power:
|
115 VAC, 400 Hz @ 861VA |
|
Weight:
|
26.2 lbs. / 11.88 kg.
|
|
Operating Temperature Range: |
-20 to +55°C |
|
Size (in./mm.): |
9 x 6 x 19.3 / 228 x 152 x 491 |
The ICE3006 is an agile filter/amplifier cascade for the UHF frequency band with a VHF bypass. It enables simultaneous operation of multiple transceivers in the cosite environment. This filter/amplifier provides multiple poles of RF selectivity to reduce broadband noise, harmonics, and spurious signals while still providing full output power in transmit mode and excellent selectivity to interfering signals at the transceiver’s RF input in receive mode. All transmit, receive, and bypass switching is incorporated into the three-port design (LOS and SATCOM). The ICE3006 incorporates extensive Built-in-Test capability and is qualified for airborne applications. A mounting tray is available as an option for easy incorporation on your platform. Minor modifications are available at a nominal cost. Please consult factory for details.


![]()
Data is believed to be accurate. All data is subject to change without notice.